Acrylic Inlay

A post shared by Ben Light (@blight_design) on

Been experimenting with milled acrylic inlay. I CNC the acrylic parts, use acrylic weld to attach the parts (I used a lot), let it dry then sand up to 400 grit, and finally polish with wax on a buffing wheel. The parts came out pretty seamless and the waxing wheel knocks all of the hard edges off. I really like the look and feel of this process.

Untitled

Untitled

Untitled

Untitled

Untitled

Untitled

Tags: ,

Comments are closed.