B.Light Design

Made these guys a little while ago. I’ve been iterating on this robot rabbit form for a while now. I’m afraid there is more to come.

Bantam Tools posted my wooden toy car tutorial.

Bantam Tools posted a nice interview on my Magnetic Clock project and some other work I’ve been doing. Thanks for the press.

If you’re interested, take a look.

The Raspberry Pi Foundation put together a video of the “blocks” I built for them for Maker Faire a few months ago.

The project was a lot of fun and everybody was a delight to work with. Thanks Matt for yet another great collaboration.

I can’t believe it took me this long to make an Iron Man Robot Recipe. Two cans, a few milled parts, and a nice powder coat paint job. I might make a couple more of these, probably put some lights inside.

All the milled parts.

I made the “blocks” that the Raspberry Pi Foundation used for this year’s Maker Faire in New York. Sort of a retro science fair kind of vibe. I had major deja vu making these, as a kid I used to hammer nails into blocks and wire up simple circuits. I’ve come full circle.

Thanks for the project Matt.

I built a project for the newly rebranded Bantam Tools. The Magnet Clock is a kinetic sculpture built using magnets, a clock mechanism, and some milled parts.

If you’re interested, take a look.

I recently milled this (compression?) spring out of 20 gauge brass. It was basically an experiment, I have no real use for it. It works surprisingly well and has that old-timey clockwork look.

Milling some diamonds in maple on the 4 axis. Would that be miamonds or diaples?

I’ve done some scrap plywood glue ups in the past. And I’ve been happy with the results after they’ve been turned or milled. But glueing them at an angle has always a bit tricky. So I made a jig.

All from scrap MDF, this guy lets me adjust the angel of the slant. I hope it helps me experiment a lot more with this technique.